Dulux Easycare Satinwood

Finish: Satin

Size: 0.75ltr, 2.5ltr, 5 ltr

Our Dulux Easycare Satinwood is a water-based finish for interior wood and metal. Ten times tougher than conventional satinwood, it is scuff-resistant and perfect for areas of high wear. It is also easy to spread, requires no undercoat and has a non-yellowing formulation. Available in a range of exciting colours.

Applications: 2 coats

Usage Details

Preparing the surfaces: To get the best results with Dulux Easycare Satinwood, make sure surfaces to be painted are sound, clean, dry (new surfaces particularly must be fully dry). Remove all loose and defective paint. Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead. Where necessary, wash the surface to remove dirt, grease and powdery or dusty residues. Rinse with clean water and allow to dry. Seal surfaces that remain powdery after thorough preparation with an appropriate plaster sealer. Where necessary, rub down and then wipe off with a damp, lint free cloth to avoid dust.

Painting: Apply with a roller or brush.

Cleaning: After use, remove as much paint as possible from equipment before cleaning with water.

Storing: Do not use or store in extremes of temperature and protect from frost. To prevent spillage, please store and transport upright.

Recycling: When this paint container is empty, please ask us about recycling. If you have leftover paint, please dispose of it responsibly.

Write a review

Note: HTML is not translated!
    Bad           Good

Dulux Easycare Satinwood

  • Product Code: DulEsySat
  • Availability: In Stock
  • €15.50

Available Options

Tags: interior, paint, Dulux, Easycare, Satinwood