Dulux Trade Vinyl Soft Sheen
As with other water-based paints, do not apply at temperatures below 8ºC (as recommended by British Standard BS 6150).
Technical & Safety Documentation
To get the best results with Dulux Trade Vinyl Soft Sheen, make sure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry). See Dulux Trade Datasheet 413 for full information before use. Before surface preparation, read the Health & Safety information about old lead paints.
STIR THOROUGHLY BEFORE USE. Seal new or bare surfaces with a thinned first coat of Dulux Trade Vinyl Soft Sheen (up to 1 part clean water to 5 parts paint). The nomal finishing process is 2 full coats of Dulux Trade Vinyl Soft Sheen, but on previously painted surfaces in good condition, where similar colours are used, 1 coat may be sufficient. For best colour consistency, purchase sufficient tinted paint for each job including touch-in at one time from the same source.
After use, remove as much paint as possible from equipment before cleaning with water.