Description

Preparation

Surfaces to be applied should be dry and prepared to a sound condition. It is essential to remove dirt, dust, grease and any fungal contamination.

Application

Apply 1-2 coats, suitable for slate and other natural stones. Try the product in an inconspicuous area prior to use. Not suitable for non-absorbent surfaces.

Drying Time

Approximately 1-2 hours depending on surface material.

Coverage

Approximately 5m2 per litre for sandstone but depends on type of stone porosity.

Storage

If kept closed up to 4 years. Protect from frost and direct sunlight.

Disposal

Liquid product is classified as special waste. Dry and clean containers can be recycled.